3 Axis Synchro Pressbrakes

Image:

Durma Hydraulic Downstroking Pressbrakes

Durma AD-R Series

The Durma, R Series, Synchro Hydraulic Pressbrake has material handling total ram control which allows the operator to program very slow pressing and return speeds when handling large sheets. This greatly improves handling the sheet as it is being pushed into the lower die to create the bend. By slowing the pressing speed down to a 'creep' you can virtually eliminate conventional sheet 'whip up'. This whipping effect can make it very difficult for the operator to handle the part.

Another advantage is you can program the ram to go up very slowly for a short distance, then stop and pause while the operator has a chance to take the sheet back under his control, instead of the ram simply releasing at the bottom and immediately returning to the top releasing the sheet so quickly it is difficult for the operator to handle.

This not only greatly improves material handling but can increase part quality by virtually eliminating 'dishing or bowling' around the bend area. It is also possible to program a delay or pause at the bottom which is useful in setting a bend in stainless or other exotic materials.

			1260	2060	25100	30100	30135	30175	30220	30320	37175	37220
Bending force		ton	60	60	100	100	135	175	220	320	175	220
Bending Length	(A)	mm	1250	2050	2550	3050	3050	3050	3050	3050	3700	3700
Distance between columns	(B)	mm	1050	1700	2200	2600	2600	2600	2600	2600	3100	3100
Y Rapid speed		mm/sec	200	200	180	180	160	120	120	100	120	120
Y Working speed		mm/sec	10	10	10	10	10	10	10	10	10	10
Y Return speed		mm/sec	120	120	120	120	120	100	100	100	100	100
Daylight	(D)	mm	433	530	530	530	530	530	530	630	530	530
Table width	(G)	mm	104	104	104	104	104	104	104	154	104	104
Table height	(F)	mm	790	900	900	900	900	900	900	900	900	900
Stroke	(C)	mm	160	265	265	265	265	265	265	365	265	265
Throat dept	(E)	mm	365	410	410	410	410	410	410	410	410	410
Support Arms		amount	2	2	2	2	2	2	2	2	2	2
Back gauge finger blocks		amount	2	2	2	2	2	2	2	2	2	2
Speed of travel in X-axis		mm/sec	350	500	500	500	500	500	500	500	500	500
Travel in X-axis		mm	500	650	650	650	650	650	650	650	650	650
Motor power		kw	4	7.5	11	11	15	18.5	22	37	18.5	22
Oil tank capacity		lt	60	100	100	100	150	250	250	250	250	250
Length	(L)	mm	2490	3300	3800	4200	4200	4350	4250	4300	4950	4950
Width	(W)	mm	1285	1650	1670	1670	1680	1700	1770	1820	1700	1770
Height	(H)	mm	2375	2750	2750	2750	2750	2750	2900	3230	2900	2900
Weight approx.		kg	3500	5850	8650	9250	10250	11250	12250	17250	17250	14100

			40175	40220	40320	40400	60220	60320	60400
Bending force		ton	175	220	320	400	220	320	400
Bending Length	(A)	mm	4050	4050	4050	4050	6050	6050	6050
Distance between columns	(B)	mm	3600	3600	3600	3400	5100	5100	5100
Approach speed		mm/sec	120	120	100	100	100	100	100
Bending speed		mm/sec	10	10	10	8	10	10	8
Return Speed		mm/sec	100	100	100	80	100	100	80
Daylight	(D)	mm	530	530	630	630	530	630	630
Table width	(G)	mm	104	104	154	154	154	154	154
Table height	(F)	mm	900	900	900	1040	1100	1100	1220
Stroke	(C)	mm	265	265	365	365	265	365	365
Throat dept	(E)	mm	410	410	410	510	410	410	510
Support Arms		amount	2	2	2	2	4	4	4
Back gauge finger blocks		amount	2	2	2	2	4	4	4
Back gauge speed		mm/sec	500	500	500	350	350	350	350
Back gauge range		mm	650	650	650	750	750	750	750
Motor power		kw	18.5	22	37	37	22	37	37
Oil tank capacity		lt	250	250	250	450	250	250	500
Length	(L)	mm	5250	5250	5300	5750	7500	7500	7500
Width	(W)	mm	1700	1770	1910	2110	1770	1910	2110
Height	(H)	mm	2750	2900	3230	3540	3250	3450	3710
Weight approx.		kg	12850	14750	20750	26750	20590	28250	35750

Specifications subject to change without notice

Download the ADR Brochure

go back

About New Century Machinery

New Century Machinery have been supplying engineering machinery for over 30 years. We supply and source machinery for all types of industry

Get in touch

New Century Machinery
Unit 2,
Riverside Industrial Estate,
Margaret Street,
Ashton-under-Lyne,
OL7 0QQ

+44 (0) 161 330 4242

+44 (0) 161 343 1347